How do I scan in my entire manifest with Delm8 route planner?

How do I scan in my entire manifest with Delm8 route planner?

With Delm8 route planner you can upload all your postcodes in one step

Importing your postcode manifest

From your Delm8 route planner home screen tap 'Add stop'. This will open the 'Add stop' screen as shown below.
The 'Scan Manifest' section is shown just under the 'Enter Postcode' slot. 
You can either scan in a paper manifest, or import from your phone's gallery

Scanning a paper manifest

  1. Tap the 'Camera' icon
  1. Then focus your camera on the manifest. You can either let it scan automatically or you can tap the button as if taking a picture.
  1. Your document is now scanned and your app should look like this. You are now ready to choose the postcodes to import.
    1. Tap the 'Crop and rotate' button shown in the image below. This will highlight the edges of your document.

  1. Drag the four circles away from the edges so they cover ONLY the section with your postcodes. Try to keep the lines as straight as possible. In the example below, the lines are being drawn toward the centre of the image as that's where the postcodes are.

  1. The image below shows the scan line over the area with postcodes. The postcodes in your manifest may be in a different column or section, please refer to your own manifest for confirmation. Ensure you only cover your destination postcodes.
  2. When done tap 'Apply'
Your image is now ready to be imported into Delm8.
***If you have more than one page to scan use the '+' button to import more. Keep repeating until you are done.

  1. When you are finished tap 'Next' and your manifest will be imported into your Delm8 route planner app.
  1.  You should now have your postcodes as shown below.

Searching for an address from the manifest

  1. Tap on one of the postcode.
  2. Delm8 will now search for this address and return it as shown below. Add the relevant address to the list by tapping the '+' on the right side
  3. Repeat the above searches for as long as necessary
  4. Once searched, the postcode will get a green tick and it'll be disabled. To reset it, long press on it and then choose 'Reset '



    • Related Articles

    • How to add stops into your Delm8 route planner

      Before adding stops, first make sure you have created a route - click here for how to create a route To add stops into your route and optimize your route: Select 'Add stop' button or start typing a postcode into the slot at the top of your map view ...

    • Sharing a route in Delm8 route planner

      You can share a route with your colleagues using any popular messaging app such as WhatsApp or Telegram. Select the route you would like to share and then tap on the 3 dots. You can select the 3 dots either from the 'History' screen or from the top ...

    • How to Create a Route in Delm8 Route Planner App

      Creating a route in Delm8 route planner is easy and straight forward. First open your Delm8 route planner app - also called Delm8 Pro On the bottom right of your screen tap ‘Route Planner’ and then tap ‘New Route’. You will then see the screen below ...

    • Mark a stop as either your FIRST or your FINAL

      With Delm8 route planner app it is very easy to set a particular stop as either your FIRST or FINAL. To mark a stop as First or Final, tap on the stop and then choose the relevant button from the bottom sheet as shown in the pictures below. Marking a ...

    • Delm8 Route Planner Settings

      Customise Your Delm8 Route Planner Experience Make Delm8 work the way you do by exploring the Settings screen. To get started, open the menu and tap on Settings. Here you’ll find a range of options to tailor the app to your preferences and working ...